You
are now ready to glue the other half of the fuselage to the half
with the sticks. I run a bead around the outside, then a bead on all the sticks
on the inside. If it touches the other piece of coro it gets glued.
Use plenty of ca, especially on the engine bearers and center sticks.
Here is a pic of the fuselage just before gluing.
Put some books on top of the fuselage to hold it nice and flat until the
glue dries. Preferably for a half hour or so. Here is the
completed fuselage.
and here it is on the
scale. Finished weight: 9.8 oz.
